Engineered to reduce fuel leakage during pouring, transport, and storage.
Fits a wide range of fuel containers with adaptable cap design.
Flexible spout helps improve accuracy and reduce overpouring.
Built to withstand fuel exposure, temperature changes, and rough handling.
Extra replacement spout included for backup or multiple fuel cans.
BUNDLE & SAVE
Couldn't load pickup availability
Official ELNUVO® Under-Eye Care Device
Made in Germany and designed for targeted daily under-eye care using 630nm red light technology.
2-Pack Gas Can Spout Replacement Kit
Old gas can still good, but the spout is cracked, leaking, missing, or hard to pour from?
This 2-Pack Gas Can Spout Replacement Kit helps turn old fuel cans into easy-pour, cleaner, more controlled containers — without buying new gas cans.
Perfect for fueling:
Lawn mowers, generators, ATVs, tractors, boats, snow blowers, pressure washers, and small-engine equipment.
Main gaskets are pre-installed, so it’s ready to use right out of the box.
Your Gas Can Isn’t Useless — The Spout Is the Problem
Most people don’t need a new gas can.
They just need to replace the part that causes the mess.
Old gas can spouts often become:
❌Cracked or broken
❌Loose or leaking around the cap
❌Slow and awkward to pour
❌Hard to aim into small tanks
❌Messy when filling lawn mowers or generators
❌Missing after years of garage use
❌Frustrating enough to make you buy a new can
Why Homeowners & Garage Owners Choose This Kit
⚡ Ready to Use Out of the Box
No confusing setup. The main sealing gaskets are already pre-installed, so you can attach the spout faster and start using it right away.
🌿 Flexible Spout for Easier Pouring
The bendable yellow spout helps you aim fuel into small or awkward tank openings with better control. Great for lawn mowers, generators, ATVs, boats, tractors, snow blowers, and other outdoor equipment.
💧 Helps Reduce Leaks & Messy Spills
Thick rubber gaskets and threaded caps help create a tighter seal when properly installed, helping reduce dripping, waste, and cleanup.
🔧 Coarse & Fine Thread Caps Included
Different gas cans use different thread styles. This kit includes both coarse-thread and fine-thread caps for better compatibility with common plastic fuel cans.
🛠️ 2-Pack Value — Upgrade Two Gas Cans
Perfect for the garage, shed, truck, workshop, farm, or boat. Upgrade two old gas cans at once and make fueling easier.
📏 Fits Most Common Gas Cans
Designed for many 1/2 gal, 1 gal, 2 gal, 5 gal, 6 gal, and 10 gal plastic gas cans.
Fits mouth sizes: 1.7" – 1.82"
Take a look at the families involved
Designed to Fit Most Common Gas Cans
This Gas Can Spout Replacement Kit is designed for most common plastic gas cans, including many:
1/2 gallon, 1 gallon, 2 gallon, 5 gallon, 6 gallon, and 10 gallon gas cans.
Fits Gas Can Mouth Sizes: 1.7" – 1.82"
What’s Included in the 2-Pack Kit
Each kit includes the parts needed to help restore two gas cans:
- 2 flexible yellow spout tubes
- 2 threaded nozzle caps
- 2 coarse-thread collar caps
- 2 fine-thread collar caps
- 4 screw collar caps
- Pre-installed rubber gaskets
- 2 types of vent caps
- Drill bit for vent cap installation
A Small Upgrade That Makes Your Gas Can Useful Again
Leaks, cracks & poor control
Cleaner, smoother pouring
Nozzle condition
Cracked, leaking, or missing nozzle
Flexible yellow replacement spout
Seal quality
Fuel leaks around the cap
Pre-installed gaskets help create a tighter seal
Pouring control
Hard to pour into small mower or generator tanks
Bendable spout helps improve reach and control
Fuel flow
Slow, awkward fuel flow
Vent cap option helps fuel pour more smoothly
Mess control
Gas spills on hands, equipment, or garage floor
Cleaner pouring with less mess
Value
Makes you think you need a new gas can
Restores the gas can you already have
Kit upgrade
One bad nozzle ruins the whole container
2-pack kit upgrades two gas cans
Simple 3-Step Setup
Step 1: Choose the Right Cap
Pick the coarse-thread or fine-thread cap that best matches your gas can.
Step 2: Attach the Pre-Gasketed Spout
The gaskets are already installed, so setup is simple and convenient.
Step 3: Add the Vent Cap if Needed
Use the included vent cap option for smoother pouring. Some gas cans may require drilling for vent installation.
Always install vent caps only on an empty, dry container and follow safe handling instructions.
A new gas can can cost more than you expected
This kit helps you:
- Save money by restoring old cans
- Reduce messy fuel spills
- Make pouring easier and more controlled
- Replace missing or broken nozzles
- Keep backup fuel cans ready for emergencies
- Upgrade two gas cans with one kit
Perfect for Real-Life Garage, Yard, and Outdoor Use
Use it when you need easier refueling for:
- Weekend lawn mowing
- Generator backup fuel
- Garage and workshop use
- Farm and tractor equipment
- Boat and outdoor equipment
- ATV and UTV refueling
- Snow blower fuel cans
- Emergency fuel storage
- Replacing missing or damaged nozzles
Make Your Old Gas Cans Easy to Use Again
Stop struggling with cracked, leaking, slow, or missing gas can nozzles.
Upgrade your old fuel cans with a 2-Pack Gas Can Spout Replacement Kit and enjoy cleaner pouring, better control, and less frustration every time you refuel.
Real Feedback From Gas Can Users
Customers replacing old, leaking, or broken fuel spouts with a faster and cleaner pouring experience.
My old gas can spout was leaking every time I used it. This replacement fixed the issue immediately. Easy install and fits perfectly.
I wasn’t sure if it would match my older container, but it screwed on without any issues. Much better than buying a whole new gas can.
The flexible spout makes pouring into small engines so much easier. No more mess when filling the lawn mower or generator.
Took less than 5 minutes to install. Honestly surprised how much better it works than the original cap system.
Having two replacements is perfect. I fixed both my cans and still have a spare. Solid build quality for the price.